CP1-Type Chemical Pallet 1000 × 1200
1000 × 1200 × 138 mm
The most widely used chemical pallet format, 1000 × 1200 mm, for sacks, cartons and boxes on automated filling lines.
- Dimensions: 1000 × 1200 × 138 mm (L × W × H)
- Construction: Block pallet, 3 bottom boards
- Fork entry: 4-way
- Components: 15 boards, 9 blocks
- Material: Softwood (pine / spruce)
- Typical use: Bagged goods, cardboard boxes and cartons
- Treatment: ISPM-15 heat treatment, IPPC mark IN-083 HT
Custom sizes, timber grades and heat treatment available. Call +91 988-683-7016.
About the CP1 type
CP1 is the pallet most chemical and polymer plants start with. Its 1000 × 1200 mm deck is made from nine 18 mm top boards, 100 and 80 mm wide, laid with 27 mm gaps, so sacks and cartons are well supported and bag corners do not drop between the boards.
Underneath, three 100 mm stringer boards (22 mm) run across the 1000 mm side, set 40 mm in from the ends. They sit on nine blocks, 80 × 135 mm and 80 mm high, set 50 mm in from the ends and flush with the long sides, which rest on three 135 mm bottom boards. The overall height is 138 mm. The four corners of the top and bottom decks have 20 mm 45° chamfers.
Because conveyors and palletisers in chemical plants are set up around these positions, we keep to the standard CP1 layout. The pallets carry our ISPM-15 mark “IN-083 HT”; we are not an EPAL licensee, so they are CP1-type pallets without EPAL or CP markings.
Key Features
- Standard CP1 dimensions: 1000 × 1200 × 138 mm
- Nine top boards (100 and 80 mm) give a near-continuous deck
- Stringer boards 40 mm and blocks 50 mm in from the ends, as in the CP1 drawing
- 15 boards and 9 blocks; 20 mm chamfered deck corners
